
Five generations
of Canterbury contracting.
Our family story begins in a Derbyshire village and follows the land through Canterbury, Marlborough and home again.
It is a story of farms and vineyards, of new beginnings, of machinery and long days—and of the people who worked together through it all.
From Hadfield to Canterbury
The Hadfield family came to New Zealand in 1862 from the village of Hadfield in Derbyshire, England. Agricultural contracting became part of the family's working life in Canterbury, passed through Errol's great-grandfather, grandfather and father.
At 300 Stanmore Road in Christchurch, Joseph Hadfield planted a weeping elm in 1865. The tree and the family memorial at Barbadoes Street Cemetery remain part of the record of those early generations.

A family trade
Errol's father, Alan, helped build the Lewis Pass road from the summit to the Hanmer turn-off during the Depression years of the 1930s. He later bought a 300-acre dairy and cropping farm in Ellesmere, Canterbury.
With a father, grandfather and great-grandfather who had all worked as contractors, Errol grew up with the trade close at hand. Years later, opening a paper road between two Kindale properties would remind him of the work they had done.

Errol finds his start
Errol spent three years in Australia working as a sheep shearer and wool classer. He saved enough to make his own start in farming and bought his parents' Canterbury farm in 1960.
By 1973, Errol and Kaye were ready for a change. They sold the Ellesmere property and bought 60 acres in the Omaka Valley near Blenheim, where they began developing a vineyard in 1975.

A new beginning in Marlborough
Grape growing was still new enough to feel like a risk. As Errol recalled, the vineyard prospered, and the family spent the next 25 years among the vines.
They grew a range of grapes for their own Kindale label and for Montana. Alongside their own vineyard, they managed other properties and offered viticultural contracting throughout Marlborough.

The Kindale vineyard years
Kaye handled telephone calls, worked in the vineyard and tended a large garden around the house. At times, that garden was open for visitors to enjoy.
Their four children—three sons and a daughter—grew up with the vineyard. They helped install trickle irrigation and run wires along hundreds of rows of trellis. Errol looked back on those years knowing how much the family's help had meant.

Home to Canterbury
After the vineyard years, the Hadfields sold their vineyards to Ngāi Tahu and bought land back in Canterbury. Errol and Kaye remained based in Blenheim as the family established a cattle farming and agricultural contracting operation at Summerhill in North Canterbury.
The account of this period describes two 100-acre properties joined by a 900-metre paper road. Opening it required surveying and fencing—a kind of work Errol recognised from his father's and grandfather's contracting days.
Kindale ran about 200 cattle on the properties, feeding them wrapped silage grown at Summerhill as well as some bought in. The farming and contracting work covered Ohoka, Fernside, Rangiora and Oxford.

Geoffrey and the next generation
The youngest son, Geoffrey, shared the family's interest in agriculture and machinery. In Kindale's Summerhill chapter, he handled the day-to-day farming and contracting while Errol managed the business, kept the books and still made time for a turn on the tractor.
The family history also introduces Daniel James Hadfield as a possible sixth generation of farmers and contractors. It is a hopeful glimpse forward, captured when he was three years old.

The machines behind the work
When the family returned to Canterbury, they invested in machinery through Chris Clifford at Farm Machinery and Repairs in Blenheim. Their John Deere 1640, previously used in the vineyards, was traded for a four-wheel-drive John Deere 6200 with a front-end loader for stacking bales. It also worked for mowing and side raking.
The larger 120 hp John Deere 6610 powered a Vicon Balepack. Errol enjoyed his time in its air-conditioned cab, but his reason for investing in good equipment was practical: individual farmers could not always justify owning every machine they needed.

Machinery and methods
The machinery was part of daily life at Kindale. These details record the equipment and techniques used during the Canterbury contracting years described in the family account.
01 Baling and wrapping +
The Vicon Balepack formed a bale in its chamber, transferred it onto the wrapping table and lowered it gently to the ground after wrapping. Baling and wrapping in one pass saved time. Operators could select bale density or leave off the plastic wrap when it was not needed.
Each wrapped silage bale was a sealed, transportable unit. The family used a Hustler Chainless 2000 bale feeder and a Rata Bale Handler with soft hands to stack bales weighing about 800 kg. Surplus wrapped silage could be sold or fed to their cattle when summer grass was short.
02 Ploughing and cultivation +
The reversible, variwidth Kverneland EC plough turned over at the headland for the return pass. Its three-point linkage and Pac-a-Mat roller let the operator roll furrows as they worked and adjust the width to suit conditions. The family also used a Kverneland TLA cultivator.
03 Mowing and raking +
A 2.8-metre Lely Splendimo 280 TC mower conditioner handled the crop. In good conditions with a heavy crop, a separate rake was not always needed. The crop was left to wilt for 24 to 36 hours before being wrapped. When raking was required, the family used a Slam V10 for a smooth feed into the baler.
04 The contracting work +
Kindale worked for dairy and deer farmers, and for owners of smaller lifestyle blocks. Some clients produced as many as 1,000 bales on their land. The family sometimes harvested surplus grass from 20-acre blocks and bought the wrapped silage to feed their own cattle.
Errol recalled that the first customer noticed the Vicon baler in the shed. That first season brought about 15 other clients, and they returned the following year. As demand grew, the family engaged a semi-retired farmer part-time.
Read the complete historical account +
Five Generations Of Canterbury Contracting
Five Generations Of Canterbury Contracting Errol Hadfield reckons that agricultural contracting is in his genes. For good reason: Errol's father, grandfather, and great grandfather - who immigrated to Canterbury from the village of Hadfield, Derbyshire, England, in 1862 - were all contractors. Errol's father, Alan, helped build the Lewis Pass road from the summit to the Hanmer turn-off during the depression years in the 1930s, and he later bought a 300-acre dairy and cropping farm in Ellesmere, Canterbury.
To get his start, Errol worked as sheep shearer and wool classer in Australia for three years. He saved money for his first farm, and in 1960, he bought his parent's farm. By 1973 Errol and his wife, Kaye, had outgrown the Canterbury farm and were looking for a new challenge.
They decided to make a dramatic change in their lives. They sold the Ellesmere property and bought 60 acres of land in the Omaka Valley near Blenheim, which they started developing into a vine-yard in 1975. "Grape growing was very new then, so it seemed a bit of a risk to go into viticulture at the time," Errol says. But as time has shown, that risk soon proved to be very successful, and the vineyard prospered.
Over the next 25 years, the Hadfields reared their four children (three sons and a daughter) and grew a range of grape varieties for their own label, 'Kindale', as well as for Montana. In addition to working their own grapevines, they managed other vineyards and offered viticultural contracting services in the Marlborough region. "My wife, Kaye, fielded telephone calls and worked in the vineyard," Errol says. "She also developed and maintained a large garden around the house, which was at times on display and open to the public. The children grew up with viticulture and were very helpful throughout those 25 years with the installation of trickle irrigation and running out wires for the hundreds of rows of trellis." Looking back, Errol says he could not have done it without their help.
The Hadfields sold their vineyards to Ngai Tahu two years ago and last year bought 100 acres of land back in Canterbury, the territory of Errol's ancestors. Errol and Kaye still live in Blenheim while their eldest son works in London, and another son and daughter live in Christchurch. "The youngest, Geoffrey, was the only one keen to work in agriculture. He has a keen knowl-edge of machinery and is a seal asset for the new business," Errol says.
Now semi-retired, Errol and Kaye work with Geoffrey to run Kindale Holdings Ltd., a North Canterbury cattle farming and contracting business at Summerhill. Geoffrey handles the day-to-day operation of the contracting and farm, while Errol does overall management, keeps the books and finds his way to Summerhill once a fortnight to do a stint on the tractor now and again. The Hadfields recently bought another 100 acres joined to the original land by a 900 metre paper road which they've opened for access between the properties. "It was interesting to open up that road," Errol says. "It had to be surveyed and fenced.
I'd never done it before yet it was the kind of contracting my father and grandfather had worked in all those years ago." Kindale Holdings Ltd. runs about 200 head of cattle on the two properties and offers a range of agricultural services in baling, ploughing and cultivation throughout Ohoka, Fernside, Rangiora, and Oxford. They feed their cattle wrapped silage from their own land at Summerhill and buy some in as well. "Eventually, I would like to increase the number of cattle with improved fencing and new pasture together with supplementary feeding," Errol says. When the Hadfields changed from viticulture to their present operation, they invested in a whole new fleet of machines through Chris Clifford, manager of Farm Machinery and Repairs in Blenheim.
Though they originally brought their John Deere 1640 tractor down from Blenheim, where they'd used it to work in the vineyards, Errol says they decided to trade it for a John Deere 6200 to suit their new contracting needs. The 6200 is a four-wheel drive and has a front-end loader for stacking bales. It is also used for mowing and side raking.
Their larger tractor is the John Deere 6610, a four-wheel drive with plenty of power, 120hp, to run their new Vicon Balepack baler. When it's his turn for a stint in the tractor seat, Errol relishes the opportunity. "It's a bit of that 'boys with their toys' idea, I guess, but the cab in the new 6610 is comfortable with the air conditioning, computerised functions, and even a CD player - it's great to use. "Seriously, though, I think it's important to have good equipment because people are going to get away from buying their own machinery - it's too expensive for each farmer to buy his own." Indeed, it was Kindale's top of the line equipment that first attracted their initial customer. style="text-align: center;" "Our first client came to us," Errol explains. "They saw the Vicon baler in the shed and were impressed. So we did work for them that year, along with about 15 other clients.
They have all come back to us again this year." Last year the Hadfields' Vicon Balepack was the only one in the South Island, though there are now two or three other ones, Errol says. "The baler is a real time-saver because it does the baling and wrapping in one pass," he says. It gathers hay and forms the bale in a chamber then loads it onto the wrapping table. Once wrapped, it is then gently lowered onto the ground, he explains.
Errol says they also appreciate the ability to choose the bale density and the option of omitting the plastic wrap if required. Wrapped silage is easily stored, and each bale is a sealed unit that generally has a higher-quality dry matter content than bulk silage. Also, the likelihood of effluent seepage is extremely small.
Wrapped silage is easily transportable and therefore can be sold in cases of surplus. It can prove invaluable when summer grass is in short supply. For their other baling needs, the Hadfields use the Hustler Chainless 2000 bale feeder and the Rata Bale Handler, equipped with soft hands to stack the 800 kg bales after they've been wrapped.
At the start of the season, the Hadfields enjoy the features of a new plough, the reversible, variwidth Kverneland EC. "With this plough there's no more of the old idea of having strikeouts and sometimes deep plough finishes, Errol explains. "Because the plough is reversible with a 3-point linkage, we can start on one side of the paddock, get to the headland and the plough turns itself over to do the next trip back. There's a roller called a Pac-a-Mat, which is attached to the side and swings 180 degrees, to roll the furrows down while you are ploughing. We can also adjust the width so that when we are in good ploughing conditions we can have wide furrows." The Hadfields also run a Kvemeland TLA cultivator.
Their mower/conditioner is a new 2.8 meter Lely Splendimo 280 TC. "When conditions are right, and we get a heavy crop, we don't even need to use the rake, the mower does the job. We rake only when there is a light crop," Errol says. After mowing, and in good weather conditions, Errol says they leave the crop to wilt from 24 to 36 hours which makes high-quality wrapped silage.
When raking is required, the Hadfields use their Slam V10, which "doesn't rope the row and gives a smooth feed into the baler." Clients of Kindale Holdings Ltd. are a mix of dairy and deer farmers, some of whom produce up to 1,000 bales on their land. The company also has a few client who own lifestyle blocks. "There are people with 20 acres of land who don't know what to do with their surplus grass. So we harvest it and then buy the wrapped silage off them for our cattle," Errol says.
To keep up with the demand, the Hadfields have now engaged a semi-retired farmer to work part-time. But Errol says he thinks the demand for Kindale services will continue to expand. "People hear about our work, and we have advertisements in the yellow pages and newspaper," he says.Just as well, because an increased demand means Errol might just have to get on that John Deere 6610 a bit more. Judging from the way Errol's eyes light up when he speaks about the tractor, this is a pleasing pros- pect.

One generation
to the next.
From the first Hadfields in Canterbury to Geoffrey and Daniel, the family’s working life has taken many turns. The thread connecting them is here in the people, places and photographs they left for us to share.
Explore the family archive ↗